0086-371-67666667
                          shuguangzhongji@163.com
                          Current Position:Home > News > Industry news >

                          The workflow of the vertical roller mill

                          Article source:admin Popularity:Dateline:2019-03-04 16:46

                          The vertical roller mill is referred to as vertical mill, and is used for cement raw materials, cement clinker, slag and cinder grinding, which has the characteristics of simple structure, low manufacturing and use cost. In industrial production, we have always maximized production efficiency as our goal. If we do not understand the workflow of the vertical roller mill, it is difficult to improve production efficiency. This article mainly introduces the workflow of the vertical roller mill, which is convenient for everyone to understand the workflow of the vertical roller mill.

                          The motor drives the grinding disc to rotate through the reducer, and the material falls from the feeding port to the center of the grinding disc through the lock air feeder, and the hot air enters the grinding machine from the air inlet. As the grinding disc rotates, the material moves to the edge of the grinding disc under the action of centrifugal force. When it passes through the annular groove on the grinding disc, it is crushed by the grinding roller and crushed. After the crushing, the material is brought up by the high-speed airflow of the wind ring at the edge of the grinding disc, and the large particles fall directly to the grinding disc. When re-grinding, when the material in the airflow passes through the upper separator, the coarse powder falls from the cone to the grinding disc and re-grinds under the action of the rotating rotor. The qualified fine powder is ground together with the airflow and collected by the dust collecting device, which is the product. The moisture-containing material is dried during the contact with the hot gas stream, and the temperature of the hot air can be adjusted to meet the requirements of different humidity materials to achieve the desired product moisture. By adjusting the separator, the thickness required for different products can be achieved.

                          The above is the introduction of the working principle, welcome users who need to come to our company to visit and guide.

                          E-mail : shuguangzhongji@163.com
                          Cel : 0086-13523465141 

                          Keywords:vertical roller mill workflow

                          The same article

                          HOT

                          link

                          Vertical roller mill CNC Processing Hardwa Raymond mill China Forklift Truck EPS Machine

                          视频区 国产 欧美 日韩